The W4 two-way loudspeakers with built-in 100V transformer and 8Ω power tap are perfect for both distributed and near-field applications in environments such as retail stores, restaurants, bars, churches and gyms. The low frequencies are reproduced by a 4” direct-radiating woofer with a polypropylene cone, while the high-frequency section is based on a titanium tweeter. The speaker’s design with a waveguide improves dynamics and efficiency bringing out details in everything you listen to, while reducing reflections that can color the sound. A U-bracket is included and will support your installation on the wall or ceiling.Download brocedure.
THE W4 AND W6 SPEAKERS ARE AVAILABLE IN BLACK AND WHITE TO MATCH THE DECOR OF YOUR INSTALLATION.
Install your W4 and W6 speakers easily, adjusting the wall bracket and positioning in the desired position.
The W4 and W6 speakers are an excellent solution to sound your installation such as gyms, restaurants, bars, offices, retail stores among others.
The integrated transformer allows you to use the W4 and W6 speakers at 100V line configuration for medium to large scale installations. For this purpose, you can adjust the tap on the position you want.
Low Impedance Input
The low impedance input allows you to use your speaker in 8Ω configuration for your small to medium installations.
100V Line Input
The built-in transformer allows you to use the speaker in 100V line configurations for your medium to big installations.
You can install your speaker on either horizontally or vertically, depending on your installation needs.
The installation is made easy with no high technical skills or very special tools needed to install your device.
Easily install your speaker on the wall or ceiling using the included bracket.
The discreet design allows you have an unobtrusive sound source keeping the original design of your venue.
2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB)
90Hz – 18kHz
Nominal Coverage (-6dB)
100° H x 100º V
8Ω (low impedance mode)
Sensitivity (1W, 1m)
Maximum SPL (calculated)
Transformer Taps 100V
1.25W | 2.5W | 5W | 10W
Low Frequency Driver
4″ Polypropylene Cone Woofer
High Frequency Driver
0.5″ Mylar Dome Tweeter
High-grade Rugged Polypropylene
140 x 215 x 135mm (5.5″ x 8.4″ x 5.3″) [W4] | 140 x 245 x 158mm (5.5″ x 9.6″ x 6.2″) [W4 + U-Bracket]
Wall U-Bracket (included)
1.8kg (3.97lb) [W4 + U-Bracket]